Fuji Xerox DocumentCentre C400 Series User Manual page 468

E Error Codes Displayed on the Display
Error Code
003-761
003-795
005-274
005-275
006-277
007-250
007-270
007-271
007-272
007-273
007-274
444
"Cause" The paper size in the tray selected by Auto Tray Switch differs from the
paper size in the tray selected at Tray Selection.
"Remedy" Either change the paper size for the tray, or change the paper type pri-
ority setting.
See "2.3 Changing Paper Settings" (P. 35), or "
the System Settings (Common Settings)" in "Part 1 Hardware".
"Cause" The Reduce/Enlarge ratio exceeds the setting range when the
scanned document is enlarged/reduced to the specified paper size.
"Remedy" Take one of the following actions:
Directly enter the Reduce/Enlarge ratio.
q
Change the paper size.
q
"Cause" The size of the scanned document could not be detected.
"Remedy" Take one of the following actions:
Confirm whether or not the size of the paper can be automatically detected.
q
The document may not be loaded at the correct position. Confirm the docu-
q
ment's loading position.
For details see "2.2 Loading Documents" in "Part 2 Scanner" of the User Guide (Printer/Scan-
ner).
"Cause" An error occurred on the DADF.
"Remedy" Turn the DADF off then back on again. Contact our Customer Support
Center.
"Cause" A communications error occurred between the document scanner and
document feed section on the machine.
"Remedy" Contact our Customer Support Center.
"Cause" A communications error occurred between the main body and optional
trays (Trays 2 to 4) or between the main body and the High Capacity
Trays (Trays 3 and 4).
"Remedy" Contact our Customer Support Center. Tray 1 can be used.
"Cause" Tray 1 malfunctioned.
"Remedy" Contact our Customer Support Center. Trays other than Tray 1 can be
used.
"Cause" Tray 2 malfunctioned.
"Remedy" Contact our Customer Support Center. Trays other than Tray 2 can be
used.
"Cause" Tray 3 malfunctioned.
"Remedy" Contact our Customer Support Center. Trays other than Tray 3 can be
used.
"Cause" Tray 4 malfunctioned.
"Remedy" Contact our Customer Support Center. Trays other than Tray 4 can be
used.
"Cause" Tray 5 (Bypass Tray) malfunctioned.
"Remedy" Contact our Customer Support Center. Trays other than Tray 5
(Bypass Tray) can be used.
Cause/Remedy
Paper Tray Priority" (P. 129) at "5.4 Setting