Image Processor Performance; Input (Source Signal) Compatibility; Analog (Only) Input; Twin Hdmi Input - Christie J series 2.0kW Service Manual

Section 6: Specifications
6.3

Image Processor Performance

Min input pixel rate
Max input pixel rate
Max input resolution
Min input resolution
Max input frame rate with Dual
Image Processor Card
Max input frame rate with
Standard Image Processor Card
Processing
Source switching time
6.4

Input (Source Signal) Compatibility

6.4.1 Analog (Only) Input

Connectors
Color spaces/signal types
A/D conversion

6.4.2 Twin HDMI Input

Connectors
Color spaces/signal types
6-6
13 Mpix/s
165 Mpix/s Standard Mode
330 Mpix/s High Bandwidth mode
2048x1536 (QXGA)
640x400
120Hz at 2048x1080
92Hz at 2048x1536*
50Hz at 2048x1536 (QXGA)
10 bit throughout *
Switch time 1 second
Switch time 3 seconds
2 independent HDMI inputs type A
2 loop-out HDMI connectors type A
RGB
YCbCr (4:2:2)
YCbCr (4:4:4)
HDCP support
HDMI 1.3 supported (not including audio) except: 12 bit color
dithered to 10 bits; 16 bit color not supported
HDMI 1.4a (Mirage Models)
Standard Image Processor
Dual Image Processor
Dual Image Processor (DIPC) required
* QXGA with sources that can output minimum
blanking
*With sources that can output minimum blanking,
otherwise lower vertical rates
* Except Dual-DVI input in dual-link mode (dual 8
bit input paths into 10 bit processing)
Low bandwidth signals
3D signals
5 female BNC, 75 Ohm
R/Pr
G/Y
B/Pb
H/C
V
RGB
YPbPr
10 bits
J Series 2.0, 2.4, and 3.0kW Service Manual
020-100739-01 Rev. 1 (01-2012)