Christie J series 2.0kW Service Manual page 48

Section 4: Parts and Module Replacement
3. Remove the six lens mount dust boot screws.
4. Remove the front cover:
a. Remove the 6 quick-release screws holding the front skin and then remove it and set it aside.
5. Disconnect the 5 lens mount harnesses from the lens mount.
6. Remove the 4 screws from the lens mount.
7. Remove the lens mount.
8. Remove the lens mount handle:
a. Remove and discard the set screw securing the handle to the handle mount dowel.
b. Remove the handle from the lens mount.
4-28 J Series 2.0, 2.4, and 3.0kW Service Manual
020-100739-01 Rev. 1 (01-2012)