Remove And Replace The Lamp - Christie J series 2.0kW Service Manual

Section 4: Parts and Module Replacement
5. Remove the screw and lock washer securing the igniter.
6. Remove the igniter assembly.
7. Remove the three remaining terminal connections
8. Install the igniter.

4.5.15 Remove and Replace the Lamp

Replacement Lamp Part Numbers
WARNING
before handling.
Before you replace the lamp, verify you have the correct lamp for the projector.
Table 4.2
Projector Part Number
Roadster S+14K-J
Mirage S+14K-J
Roadster HD14K-J
Mirage HD14K-J
Mirage WU14K-J
Matrix WU14K-J
Roadster S+18K-J
Mirage S+18K-J
Roadster HD16K-J
Mirage HD16K-J
4-20
Always power down and unplug the projector prior to servicing. Allow the lamps to cool
Projector Model
132-010113-xx
132-010124-xx
132-011114-xx
132-011125-xx
132-012126-xx
132-012137-xx
132-013116-xx
132-013127-xx
132-014117-xx
132-014128-xx
Lamp Type
2.0 kW
2.4 kW
J Series 2.0, 2.4, and 3.0kW Service Manual
Lamp/Filter Kit Required
003-120135-xx
03-900518-xx
020-100739-01 Rev. 1 (01-2012)