4. Remove the 3 screws securing the heat sink.
5. Remove the 4 screws securing the integrator housing to optical housing.
6. Loosen the 2 quick release screws on the lamp door.
7. Loosen the screw holding the lamp module handle.
8. Pull the lamp module handle outward.
9. Remove the screw securing the integrator housing to the projector base.
J Series 2.0, 2.4, and 3.0kW Service Manual
020-100739-01 Rev. 1 (01-2012)
Section 4: Parts and Module Replacement
4-37