Christie J series 2.0kW Service Manual page 42

Section 4: Parts and Module Replacement
7. Install the lamp module:
a. Align the base plate of the new lamp module with the alignment guides in the projector.
b. Slide the lamp module into the projector until resistance increases.
c. Verify the lamp is aligned with the lamp alignment marks.
8. Move the lamp module handle inward and tighten the holding screw.
4-22 J Series 2.0, 2.4, and 3.0kW Service Manual
020-100739-01 Rev. 1 (01-2012)