Christie J series 2.0kW Service Manual page 69

8. Move the knob up and down to square the integrator rod to the projector. Make sure that all the shadows at
each corner disappears and take care to maintain the best focus on the shadowed edge while performing
this adjustment. NOTE: It may not be possible to eliminate all of the shadows from every corner, in this
instance further adjustment of the fold mirror may be required.
9. Tighten the integrator adjustment knob.
J Series 2.0, 2.4, and 3.0kW Service Manual
020-100739-01 Rev. 1 (01-2012)
Section 4: Parts and Module Replacement
4-49