Accessories; Assembling; Attaching To The Dm-D Stand - Epson DM-D110 Technical Reference Manual

2.3 Accessories

2.3 Accessories
2.3 Accessories 2.3 Accessories
extension cable for power supply
RS-232C connector installation screw
(mm type)
fixing topping screw (M3 X 10)
fixing screw (M3 X 5)
fixing screws for wood position
(M3.1 X 10)
rubber feet (square)
velcro tapes set
rubber feet (big)
fixing screw (M3 X 8)
extension support
rubber feet (small)
fixing plate ,A
fixing screws for fixing plate
stopper
fixing screw for stopper
DM-D angle fixing screw
fixing plate ,B

2.4 Assembling

Attach the DM-D110 by usingb the following procedure.

2.4.1 Attaching to the DM-D stand

The DM-D110 can be attached directly to the DM-D stand using the "DM-D stand unit for DM
Customer Display" (DP-110). The DM-D110 with the DM-D stand can be connected to a TM
printer, or be used as a standalone product.
The function differs with the DM-D stand types.
• DP-110-101/DP-110-111 :
• DP-110-102/DP-110-112 :
2-2 Setup information
DP-110-1x1 DP-110-1x2
1 -
4 -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
This is connected to the personal computer and the TM
printer with the pass-through connection.
This is connected to the TM printer with the Y-type
connection and this is set on the desk for the DM-D110 and
the DP-110-1x2.
DP-502 DP-503
- -
- -
2 3
2 -
4 -
4 -
1 -
2 -
- -
1 -
4 -
1 -
4 -
1 -
1 -
1 -
1 -
DP-504 DP-505
- -
- -
- -
- -
- 5
- -
- 1
- -
3 -
- -
- -
- -
- -
- -
- -
- -
- -
. A
Rev