ENGINE MECHANICAL
Engine Mounts
Front Mounts
IMPORTANT: There are two different types of mounts being used on the D2.8L
D-Tronic. Serial numbers 0L343125 and below use an early front mount. Serial
numbers 0L343126 and above use a later front mount. Follow these serial number
breaks if a front mount is being replaced. Only use the late front mounts on engines
with the early serial numbers if the rear bushing are also replaced.
The front engine mounts can be installed two ways. Mark the mounts before removing them
from cylinder block to ensure installation in same location.
Front Mount Standard Position
NOTE: Reverse mount pad on front mounts by loosening clamp bolts and turning pad over.
c
Front Mount Alternate Position
Page 3A-152
b
a
a -
Mount Bracket
b -
Bolts
c -
Mount Pad
d -
Clamp Bolt
a
c
b
SERVICE MANUAL NUMBER 22
b
d
a
90-860074--1 FEBRUARY 2002
50533
50533