Mercury MerCruiser D2.8L D-Tronic Service Manual page 158

STERNDRIVE (MCM) MODELS
14. Attempt to insert the solid end of the alignment tool.
a. Repeat step 13. and 14. until the alignment tool installs easily (SLIDES FREELY
NOTE: This may require tapping the sides of the tool. Do NOT check by turning. By greasing
the splines you can identify which side has interference.
70013
15. Front engine mounts must rest on boat stringer. Adjust front engine mounts if necessary.
16. Relieve hoist tension entirely.
Page 2A-12
WITH TWO FINGERS) all the way into and out of engine coupler splines. Do not
check by turning.
a - Alignment Tool
b - Gimbal Bearing
c - Engine Coupler
76921
SERVICE MANUAL NUMBER 22
c
b
a
71463
90-860074--1 FEBRUARY 2002