SERVICE MANUAL NUMBER 22
REMOVING TURBOCHARGER UNIT
1. Drain the closed cooling system.
2. Remove exhaust elbow or riser as previously outlined.
3. Remove lifting eye bracket.
Typical
4. Remove oil feed pipe and hollow bolt from coolant vent pipe at turbocharger as shown.
Loosen air filter and turbocharger-to-intake duct hose clamps.
Typical
90-860074--1 FEBRUARY 2002
a -
Bracket, Lifting Eye
b -
Screws
a -
Intake Duct Hose Clamp
b -
Oil Feed Pipe
c -
Hollow Bolt, With Sealing Washers
d -
Air Filter Clamp
a
b
a c
b
d
TURBOCHARGER
70988
70989
Page 7C-13