SERVICE MANUAL NUMBER 22
6. Remove lifters, being certain to keep them in order.
Cleaning
1. Wash all parts in cleaning solvent.
2. Dry with compressed air.
Inspection
1. Inspect lifters carefully. If any parts are damaged or worn, the entire lifter assembly
should be replaced. Refer to Specifications.
2. If outer lifter body wall is scuffed or worn, inspect cylinder block lifter bore.
3. If roller is worn or damaged, inspect camshaft lobe.
4. If push rod seat is scuffed or worn, inspect push rod.
90-860074--1 FEBRUARY 2002
a
b
c
a -
Push Rod
b -
Retainer
c -
Lifter
d -
Roller
ENGINE MECHANICAL
d
Page 3A-103
75383
75103