Shift Control And Cables; Transmission Shift Lever And Shift Cable Bracket - Mercury MerCruiser D2.8L D-Tronic Service Manual

SERVICE MANUAL NUMBER 22

Shift Control And Cables

Transmission Shift Lever And Shift Cable Bracket

1. The shift lever has two holes as illustrated. Ensure that the shift cable anchor stud is
installed in the top hole when using Quicksilver Remote Control cables.
2. On bracket with two anchor location holes: Ensure that anchor stud is installed in
the hole marked "630."
Avoid serious personal injury or property damage caused by improper shifting.
Anchor stud for shift cable must be installed in the correct hole when using bracket
with two anchor location holes.
Shift Cable Bracket - Anchor Stud Position Shown for 630 Transmission
90-860074--1 FEBRUARY 2002
b
a - Shift Lever
b - Shift Cable Anchor Stud Location (For Quicksilver Shift Cables)
c
a - Shift Cable Bracket
b - Shift Cable Anchor Stud
c - Bracket To Transmission Fasteners
WARNING
b
b
a
ZF / HURTH TRANSMISSIONS
a
a
c
71041
77520
71020
Page 8A-15