STERNDRIVE (MCM) MODELS
Do NOT use an alignment tool from another manufacturer. Alignment tools other
than Quicksilver Alignment Tool, may cause improper alignment and damage to
gimbal bearing and/or engine coupler.
To avoid damage to gimbal bearing, engine coupler, or alignment tool:
•
•
12. Attempt to insert the solid end of the alignment tool through the gimbal bearing and into
the engine coupler splines.
Page 2A-10
Do NOT attempt to force alignment tool!
Do NOT raise or lower engine with alignment tool inserted (or partially
inserted) in gimbal bearing or engine coupler.
a -
Alignment Tool (Use Only Recommended Quicksilver Alignment Tool)
b -
Insert This End Of Alignment Tool Through Gimbal Housing Assembly
CAUTION
CAUTION
a
b
SERVICE MANUAL NUMBER 22
a
70013
90-860074--1 FEBRUARY 2002