SERVICE MANUAL NUMBER 22
c. After engine has been properly aligned, relieve hoist tension entirely. Secure mounts
NOTE: It may be necessary to lower, or raise, the ECM assembly and bracket, depending
upon the final configuration of the power package, to position ECM on front mount.
90-860074--1 FEBRUARY 2002
to stringers using appropriate hardware. On port front mount do as follows:
(1.) Position ECM assembly mounting bracket holes directly over front, port engine
mount holes.
(2.) Fasten ECM mounting bracket and front mount assembly to boat stringer using
appropriate hardware (lag bolts or thru-bolts etc.).
a
a-ECM Assembly Mounting Bracket
b-Front, Port Engine Mount
c-Stringer
d-Slotted Hole For Raising Or Lowering ECM Assembly
c
b
INBOARD (MIE) MODELS
d
Page 2B-15
75301