SERVICE MANUAL NUMBER 22
Installation
FRONT MAIN BEARING
1. Align oil passage with hole of new bearing.
2. Place new bearing on Puller/Installer Tool 91-801333508 as shown. Tool will install
bearing to the correct depth. Oil passage MUST BE aligned.
NOTE: To aid installation retain bearing halves on tool with a rubber band or similar.
90-860074--1 FEBRUARY 2002
a -
Oil Passage
b -
Bearing Hole
a -
Tool 91-801333508
b -
Bearing Halves (On Tool)
b
a
a
b
ENGINE MECHANICAL
70313
70402
Page 3A-127