SERVICE MANUAL NUMBER 22
Recommissioning
Refer to Cold Weather Extended Storage - Precautions, BEFORE proceeding.
1. Reinstall seawater pump components as follows:
a. Place impeller in pump housing, turning clockwise while simultaneously pushing
NOTE: Use new gasket. Install in correct position - wide surface on side of cam.
b. Install pump cover with new gasket in noted position.
c. Install the seawater pump cover mounting screws. Tighten securely.
NOTE: Pump shown removed for visual clarity only.
90-860074--1 FEBRUARY 2002
firmly inward onto pump shaft.
e
d
a -
Impeller
b -
Seawater Pump Housing
c -
Gasket (Wide Surface On Cam Side)
d -
Cover
e -
Cover Screws
NOTICE
a
a
c
b
MAINTENANCE
71366
Page 1B-73