Oil Pan And Oil Pick-Up Tube Assembly; Removal - Mercury MerCruiser D2.8L D-Tronic Service Manual

ENGINE MECHANICAL

Oil Pan and Oil Pick-Up Tube Assembly

Removal

1. Disconnect oil drain tube from oil pan. Remove oil pan.
2. Remove screws retaining baffle, oil pick-up (suction) tube, and oil pick-up tube elbow
to block.
NOTE: This view is representative of all models. Your specific pick-up tube assembly may
differ slightly in appearance.
Typical
3. Remove old O-ring from suction tube. Remove old O-ring from elbow on engines with
two piece suction tube.
Page 3A-88
a - Baffle
b - Oil Pick-up Tube
c - Elbow
d - Inlet (Strainer End)
a - Pickup Tube
b - Elbow
c - O-rings, Two Piece Suction Tube
a
d
c
SERVICE MANUAL NUMBER 22
b
a
b
c
90-860074--1 FEBRUARY 2002
70288
70286