CLOSED COOLING SYSTEM
Specifications
Capacity
Thermostats
IMPORTANT: It is not necessary to position either thermostat in a certain location
within the thermostat housing. Ensure however, that one of each specified operating
temperature is present.
Pressure Cap
1
Coolant
IMPORTANT: Use only Mercury MerCruiser specified coolant. Use of other coolant
may cause fouling of the heat exchangers, and overheating of the engine.
These specified, premixed formulas require no mixing with water or other additives. The
low silicate ethylene glycol, special additives, and purified water formulas prevent
silicate gelling which can restrict engine cooling passages. They provide protection down
to –38 degrees C (–33 degrees F).
Page 6B-4
Description
D2.8L D-Tronic
D4.2L D-Tronic
Description
D2.8L D-Tronic
D4.2L D-Tronic
Description
D2.8L D-Tronic
D4.2L D-Tronic
Must hold rated pressure for 30 seconds without going below 76 kPa (11 psi).
Premixed Marine Engine Coolant
Fleetguard Compleat (Product 91-50663 with DCA4 additive)
Operating Temperature
1 at 70 Degrees C (160 Degrees F), and 1 at
1 at 70 Degrees C (160 Degrees F), and 1 at
82 Degrees C (180 Degrees F)
Description
SERVICE MANUAL NUMBER 22
Liters (U.S. Quarts)
Approximate
11 (11-2/3)
13 (13-3/4)
Operating Pressure
1
97 kPa (14 psi)
Part Number
92-813054A2
Obtain Locally
90-860074--1 FEBRUARY 2002