SERVICE MANUAL NUMBER 22
8. Remove the two support bracket mounting screws as shown. Remove turbocharger
unit.
Disassembly
1. Make matching marks on the exhaust housing and bearing housing to aid alignment in
reassembly.
2. Remove 6 hex nuts or hex screws and the 3 clamping plates shown.
90-860074--1 FEBRUARY 2002
a -
Support Bracket
b -
Screw With Washer (2)
a -
Matching Marks
b -
Hex Nuts or Hex Screws (6 Total - 2 Not Shown In This View)
c -
Clamping Plates (3 Total - One Not Shown In This View)
d -
Exhaust Housing
e -
Bearing Housing
b
a
e
a
c
b
TURBOCHARGER
70992
d
70993
Page 7C-15