ENGINE MECHANICAL
Removal
IMPORTANT: Mark the location of each rocker arm assembly and cylinder head to
ensure that they are reassembled in the same location.
1. Mark the position of the rocker arm assemblies and cylinder heads for reassembly.
2. Remove rocker arm oil feed line banjo bolts with sealing washers. Remove line from
cylinder heads and from rear (starboard) of cylinder block.
3. Unscrew rocker arm retaining nuts.
4. Remove the rocker arm assemblies, by lifting upward.
Page 3A-42
a -
Oil Feed Pipe
b -
Banjo Bolts With Sealing Washers
a -
Retaining Nuts
b
a -
Retaining Nuts
b -
Rocker Arm Assembly
b
a
75103
b
a
a
90-860074--1 FEBRUARY 2002
SERVICE MANUAL NUMBER 22
75387
75511