STERNDRIVE (MCM) MODELS
8. Connect the trim position sender bullet connectors, from the gimbal housing, to the
engine harness.
9. Mount the gear lube monitor in the engine bracket. Secure with strap.
10. Connect gear lube monitor wires to corresponding engine harness wires. The TAN/BLU
wire connects to ORANGE engine harness wire. BLACK wire connects to BLACK wire.
Ensure that bullet connectors are fully seated.
Typical
Page 2A-18
a -
From Engine Harness
b -
From Gimbal Housing
a -
Gear Lube Monitor
b -
Strap
c -
Bullet Connectors
a
BLU/BLK
BLK/WHT
a
b
SERVICE MANUAL NUMBER 22
b
BLK
BLK
c
90-860074--1 FEBRUARY 2002
24841
75301