Mercury MerCruiser D2.8L D-Tronic Service Manual page 778

INTERCOOLER
8. Apply Loctite 514 sealer on intake duct-to-intercooler housing mating surface. On D2.8L
D-Tronic engines apply sealer to side intake duct mating surface.
9. Using 4 allen-head screws and wave washers, install intake duct. Torque to 40 Nm
(30 lb-ft).
D4.2L D-Tronic Shown (D2.8L D-Tronic Similar)
10. On D2.8L D-Tronic Engines:
a. If the side intake duct of the intercooler housing was removed for cleaning and
b. Assemble using screws with washers. Torque screws to 10 Nm (84 lb-in.).
D2.8L D-Tronic Engine Intercooler Housing and Intake Duct
Page 7A-16
a - Intercooler Housing (Side Intake Duct On D2.8L Engines)
b - Intake Duct (Rear Intake Duct On D2.8L Engines)
c - Allen-Head Screws and Wave Washers
inspection, apply Loctite 514 sealer on mating surfaces.
a - Intake Duct
b - Intercooler Housing
c - Mating Surface
d - Allen-Head Screws With Wave Washers
a
b
d
a
c
SERVICE MANUAL NUMBER 22
c
b
90-860074--1 FEBRUARY 2002
70929
75619