STERNDRIVE (MCM) MODELS
3. Connect continuity circuit wire from engine to transom assembly. Tighten screw
securely.
IMPORTANT: Do not attach any accessory ground (–) wires to transom plate ground
point.
4. Connect any grounding wires and accessories that were connected to engine.
5. Connect seawater inlet hose to engine water inlet fitting. Tighten hose clamp securely.
Typical
Page 2A-16
a -
Flywheel Housing Screw
b -
Continuity Circuit Wire
c -
Inner Transom Plate Grounding Screw
a -
Seawater Inlet Hose
b -
Connector Fitting
a
b
SERVICE MANUAL NUMBER 22
c
73567
b
a
90-860074--1 FEBRUARY 2002
75299