SERVICE MANUAL NUMBER 22
TIMING GEAR
NOTE: Replace timing gear only if worn or damaged.
1. Install Crankshaft Gear Puller 91-801333503 and Crankshaft Pulley Puller
91-801763590 onto timing gear, as shown.
2. Remove the timing gear.
3. Remove the spacer if equipped.
Cleaning
1. Immerse crankshaft in a solvent bath and clean.
2. Put on safety glasses.
3. Clear oil passages with compressed air.
4. Dry with compressed air.
90-860074--1 FEBRUARY 2002
d
a -
Gear Puller
b -
Pulley Puller
c -
Timing Gear
d -
Spacer, If Equipped (Not Shown)
a
c
ENGINE MECHANICAL
b
70309
Page 3A-123