Mercury MerCruiser D2.8L D-Tronic Service Manual page 198

INBOARD (MIE) MODELS
5. After all wires are connected secure them with clamps or tie straps, which may have
been retaining them to engine or hoses prior to removal.
6. Connect exhaust elbow, riser or water lift muffler, if equipped, to exhaust system hose
using at least two hose clamps at each connection. Tighten hose clamps securely.
7. Connect seawater inlet hose to seawater pump connector fitting. Tighten hose clamp
securely.
Typical
8. If removed previously, connect seawater inlet hose to seawater strainer and tighten
hose clamps securely.
Page 2B-20
a-Seawater Inlet Hose
b-Connector Fitting
a-Seawater Inlet Hose
b-Seawater Strainer
c-Hose Clamps (2)
b
SERVICE MANUAL NUMBER 22
b
a
c
a
71362
90-860074--1 FEBRUARY 2002
75299