SERVICE MANUAL NUMBER 22
2. Install standard size thrust washers into flywheel side of carrier as shown. (Use
Quicksilver Needle Bearing Lubricant to help keep washers positioned.)
3. Install standard size thrust washers into front (crankshaft) side of carrier. (Use
Quicksilver Needle Bearing Lubricant to help keep washers positioned.)
4. Install new O-ring into groove around carrier. Coat with clean engine oil to assist during
installation.
90-860074--1 FEBRUARY 2002
a -
Thrust Washers (Standard Size), Flywheel Side
a -
Thrust washers (Standard Size), Front (Crankshaft) Side
a -
O-ring
a
a
a
ENGINE MECHANICAL
70408
Page 3A-133
70407
70408