Table of Contents
Advertisement
3-1. Setup Menu
3-1-3. Maintenance Menu
3-1-3. Maintenance Menu
The Maintenance menu is used for encoder output level and other adjustments items necessary for
camera's maintenance. The Maintenance menu is not normally accessible. To display this menu, switch
setting of the AT-95 board is required.
For details, refer to Section 1-5. "Function of Internal Switches—AT-95 board".
To activate the Maintenance menu, first display the TOP menu.
(Boxed items under "Settings" indicate the factory setting.)
Page
Ver.
Item
VBS
SYNC LEVEL
Y LEVEL
BURST LEVEL
CHROMA LEVEL -99 to 99 ([XX])
Q/V LEVEL
SET UP
BF PHASE
SC-H PHASE
V BLANKING
WHITE
V SAW R/G/B
SHADING
V PARA R/G/B
H SAW R/G/B
H PARA R/G/B
WHITE R/G/B
V MOD R/G/B/M -99 to 99 ([XX])
V MOD
AUTO WHITE
CLEAR
BLACK
V SAW R/G/B
SHADING
H SAW R/G/B
BLK SET R/G/B -99 to 99 ([XX])
BLACK R/G/B/M -99 to 99 ([XX])
MASTER GAIN
(Continued)
AUTO BLACK
j )
When the master modulation shading is adjusted, the V. SAW component for the R and B V-modulation shadings of the prism is
simultaneously compensated.
3-10
Settings
Contents
-99 to 99 ([XX])
Adjusts the sync level of camera's encoder output signal.
-99 to 99 ([XX])
Adjusts the Y level of camera's encoder output signal.
-99 to 99 ([XX])
Adjusts the burst level of camera's encoder output signal.
Adjusts the chroma level of camera's encoder output signal.
-99 to 99 ([XX])
Adjusts the Q (or V) level of camera's encoder output signal.
-99 to 99 ([XX])
Adjusts the sync level of camera's encoder output signal.
(This setting is valid only for NTSC.)
-99 to 99 ([XX])
Adjusts the burst phase of camera's encoder output signal.
-99 to 99 ([XX])
Adjusts the SC-H phase of camera's encoder output signal.
19,[20],21H
Adjusts the V blanking width of camera's encoder output signal.
(This setting is valid only for NTSC.)
In connection with CCU, the width is fixed to 19H.
* For a PAL model, the width is fixed to 25H at all times.
-99 to 99 ([XX])
Adjusts the volume of V.SAW compensation for the R, G,or B white
shading.
-99 to 99 ([XX])
Adjusts the volume of V.PARA compensation for the R, G, or B white shading.
-99 to 99 ([XX])
Adjusts the volume of H.SAW compensation for the R, G, or B white shading.
-99 to 99 ([XX])
Adjusts the volume of H.PARA compensation for the R, G, or B white shading.
-99 to 99 ([XX])
Adjusts the R, G, or B white level.
Adjusts the volume of V.SAW compensation for the R, G, B or master
modulation shading of the lens and prism.
ON, [OFF]
Turns the V modulation shading on and off.
Throw MENU SELECT
Starts to automatically adjust the white balance.
switch to ENTER
to execute.
Throw MENU SELECT
Resets numeric settings to "0" on the WHITE SHADING page.
switch to ENTER
(When you throw MENU SELECT switch to ENTER, the "CLEAR" indication
to execute.
flashes. Throw MENU SELECT switch to ENTER again to execute; throw to
CANCEL to cancel.)
-99 to 99 ([XX])
Adjusts the volume of V.SAW compensation for the R, G, or B black shading.
-99 to 99 ([XX])
Adjusts the volume of H.SAW compensation for the R, G, or B black shading.
Adjusts the volume of BLACK SET compensation for the R, G, or B.
(Adjusts for each gain.)
Adjusts the R, G, B or master black level.
-3,0,3,6,9,12,18,
Selects the master gain value.
24,30 dB ([X])
Throw MENU SELECT
Starts to automatically adjust the black balance.
switch to ENTER
to execute.
j )
BVP-500
BVP-500P
Advertisement
Table of Contents
