Right Base Cover - Epson SC-T7000 series Service Manual

SC-T7000 series/SC-T5000 series/SC-T3000 series

3.4.2.11 RIGHT BASE COVER

1. Remove the UPPER LEFT COVER.
2. Remove the UPPER SUPPORT R COVER.
3. Remove the PANEL BOARD. (p120)
4. Remove the TOP COVER. (p85)
5. Remove the RIGHT UPPER COVER & RIGHT ROLL COVER.
6. Remove the RIGHT LOWER COVER.
7. Remove the two screws, and remove the RIGHT BASE COVER.
A) Silver M3x8 S-tite screw with built-in washer: 2 pcs
Pay attention to the positioning points (See below figure).
Positioning point
DISASSEMBLY & ASSEMBLY
(p100)
(p94)
(p95)
(p96)
RIGHT BASE COVER
Positioning point
Disassembly and Assembly Procedure
RIGHT BASE COVER
A
Figure 3-24. Removing the RIGHT BASE COVER
Revision B
A
97
Confidential