SC-T7000 series/SC-T5000 series/SC-T3000 series
3.4.4.5 CR FFC
1.
Remove the UPPER LEFT COVER.
2.
Remove the UPPER SUPPORT R COVER.
3.
Remove the PANEL BOARD.
(p120)
4.
Remove the TOP COVER.
(p85)
5.
Remove the FRONT COVER.
(p86)
6.
Remove the LEFT UPPER COVER & LEFT ROLL COVER.
7.
Remove the RIGHT UPPER COVER & RIGHT ROLL COVER.
8.
Unlock the CR UNIT.
(p83)
9.
Remove the CR COVER.
(p122)
10. Remove the DAMPER KIT.
(p123)
11. Remove the REAR RIGHT LOWER COVER.
12. Disconnect the HEAD FFCs from the four connectors of the PRINT HEAD.
13. Pull out the HEAD FFC from the Ferrite Core.
14. Release the HEAD FFC from the two hooks of the Ferrite Core Holder.
DISASSEMBLY & ASSEMBLY
(p100)
(p94)
(p101)
(p95)
(p99)
Disassembly and Assembly Procedure
Hook
Ferrite Core
Ferrite Core Holder
Figure 3-68. Removing the HEAD FFC
Revision B
Hook
HEAD FFC
PRINT HEAD
131
Confidential