Cr Hp Sensor - Epson SC-T7000 series Service Manual

SC-T7000 series/SC-T5000 series/SC-T3000 series

3.4.4.10 CR HP SENSOR

1. Remove the UPPER LEFT COVER.
2. Remove the UPPER SUPPORT R COVER.
3. Remove the PANEL BOARD. (p120)
4. Remove the TOP COVER. (p85)
5. Remove the RIGHT UPPER COVER & RIGHT ROLL COVER.
6. Unlock the CR UNIT. (p83)
7. Move the CR UNIT on the Platen.
8. Disengage the hooks, and remove the CR HP SENSOR.
9. Disconnect the cable from the CR HP SENSOR.
DISASSEMBLY & ASSEMBLY
(p100)
(p94)
(p95)
Disassembly and Assembly Procedure
CR HP SENSOR
Cable
Connector
Figure 3-89. Removing the CR HP SENSOR
Revision B
Hook
143
Confidential