Disassembly And Assembly Procedure; Preparation For Servicing; Unlocking The Cr Unit - Epson SC-T7000 series Service Manual

SC-T7000 series/SC-T5000 series/SC-T3000 series

3.4 Disassembly and Assembly Procedure

This section describes procedures for disassembling the components allowed to be
disassembled. Unless otherwise specified, disassembled units or components can be
reassembled by reversing the disassembly procedure.

3.4.1 Preparation for servicing

3.4.1.1 Unlocking the CR Unit

Automatic
1. Turn the printer ON in the Serviceman Mode.
Turn the power ON while pressing [Menu], [Back] and [OK] buttons together.
2. Select Mecha Adjustment - CR Un
3. Press the [OK] button while [Enter] Un Cap
The carriage unit is unlocked.
DISASSEMBLY & ASSEMBLY
Cap.
is displayed.
Disassembly and Assembly Procedure
Revision B
83
Confidential