Cr Scale - Epson SC-T7000 series Service Manual

SC-T7000 series/SC-T5000 series/SC-T3000 series

3.4.4.6 CR SCALE

When replacing/removing this part, refer to
A D J U S T M E N T
R E Q U I R E D
Items and the Order by Repaired Part" (p199)
perform the specified operations including required adjustment.
1. Remove the UPPER LEFT COVER.
2. Remove the UPPER SUPPORT R COVER.
3. Remove the PANEL BOARD. (p120)
4. Remove the TOP COVER. (p85)
5. Remove the FRONT COVER. (p86)
6. Remove the LEFT UPPER COVER & LEFT ROLL COVER.
7. Remove the RIGHT UPPER COVER & RIGHT ROLL COVER.
8. Unlock the CR UNIT. (p83)
9. Remove the two screws, and remove the CR Rear Frame.
A) Silver M3x6 S-tite screw with built-in washer: 2 pcs
Pay attention to the positioning points (See
DISASSEMBLY & ASSEMBLY
"4.1.2 Adjustment
and make sure to
(p100)
(p94)
(p101)
(p95)
Figure 3-76).
Disassembly and Assembly Procedure
Positioning point
A
Positioning point
Figure 3-76. Removing the CR Rear Frame
Revision B
CR Rear Frame
Positioning point
A
Positioning point
Rear Tube Guide
Confidential
135