SC-T7000 series/SC-T5000 series/SC-T3000 series
3.4.2.5 IH COVER
1.
Remove the UPPER LEFT COVER.
2.
Remove the UPPER SUPPORT R COVER.
3.
Remove the PANEL BOARD.
(p120)
4.
Remove the TOP COVER.
(p85)
5.
Remove the RIGHT UPPER COVER & RIGHT ROLL COVER.
6.
Remove the FRONT COVER.
(p86)
7.
Remove the RIGHT LOWER COVER.
8.
Release the cable from the four clamps.
9.
Disconnect the cable from the relay connector (No.1), and release the cable of the
CARTRIDGE COVER SENSOR.
Clamp
Cable of the
CARTRIDGE
COVER
SENSOR
Relay Connector (No.1)
Figure 3-15. Releasing the Cable
DISASSEMBLY & ASSEMBLY
(p100)
(p94)
(p95)
(p96)
Clamps
Disassembly and Assembly Procedure
10. Open the Cartridge Cover.
11. Remove the four screws that secure the IH COVER.
A) Silver M3x8 S-tite screw with built-in washer: 4 pcs
A
A
Figure 3-16. Removing the IH COVER
Revision B
IH COVER
A
A
Cartridge Cover
89
Confidential