Right Upper Cover & Right Roll Cover - Epson SC-T7000 series Service Manual

SC-T7000 series/SC-T5000 series/SC-T3000 series
3.4.2.9 RIGHT UPPER COVER & RIGHT ROLL COVER
1. Remove the UPPER LEFT COVER.
2. Remove the UPPER SUPPORT R COVER.
3. Remove the PANEL BOARD. (p120)
4. Remove the TOP COVER. (p85)
5. Remove the six screws, and remove the RIGHT UPPER COVER & RIGHT
ROLL COVER.
A) Silver M4x12 P-tite screw with washer: 1 pcs
B) Silver M3x10 P-tite screw with washer: 2 pcs
C) Silver M3x8 S-tite screw with built-in washer: 3 pcs
Pay attention to the positioning points (See below figure,
3-22).
Inside
DISASSEMBLY & ASSEMBLY
(p100)
(p94)
Figure
RIGHT LOWER
Positioning points
COVER
Disassembly and Assembly Procedure
Positioning point
A
RIGHT UPPER
COVER & RIGHT
ROLL COVER
IH COVER
Figure 3-22. Removing the RIGHT UPPER COVER & RIGHT ROLL COVER
Revision B
B
C
B
C
C
Confidential
95