SC-T7000 series/SC-T5000 series/SC-T3000 series
3.4.2.2 FRONT COVER
1.
Remove the UPPER LEFT COVER.
2.
Remove the UPPER SUPPORT R COVER.
3.
Remove the PANEL BOARD.
(p120)
4.
Open the PRINTER COVER.
5.
Remove the seven screws, and remove the FRONT COVER.
A) Silver M3x8 S-tite screw with built-in washer: 7 pcs
To ensure the INTERLOCK SWITCH can detect the flag of
PRINTER COVE, tighten the screws which secure the FRONT
COVER while pulling the Front Frame toward you.
INTERLOCK SWITCH
DISASSEMBLY & ASSEMBLY
(p100)
(p94)
Front Frame
Disassembly and Assembly Procedure
PRINTER COVER
A
A
A
FRONT COVER
Figure 3-12. Removing the FRONT COVER
Revision B
A
A
86
Confidential