Borderless Printing Specification; Stacker - Epson SC-T7000 series Service Manual

SC-T7000 series/SC-T5000 series/SC-T3000 series

1.3.4 Borderless Printing Specification

AVAILABLE PAPER TYPE
For the paper types and sizes that support the borderless printing, see
Special Media Table" (p15).
ROLL PAPER CUTTING OPERATION
Printer driver
Cutting Operation
settings
A
Borderless
B
A
Single Cut
B
PRODUCT DESCRIPTION
"1.3.2.1 Epson
Explanation
The default printer driver setting is "Borderless".
The top area may become slightly uneven
depending on the image since the print
operation stops while cutting the top edge of
the roll paper.
If the cut position is misaligned slightly, small
parts of the image may be shown on the top or
bottom of the adjacent pages. If this occurs,
perform "Adjust Cut Position".
When printing only one page the operation
performed is the same as that for "Double Cut".
When continuously printing multiple sheets,
the printer cuts 1 mm inside on the top edge of
the first page and the bottom edge of the
subsequent pages to avoid showing margins.
Printer driver
Cutting Operation
settings
Double Cut

1.3.5 Stacker

Paper size
A1 594 x 841mm
A0 841 x 1,189mm
SC-T3000 Series
Approx. 1,292 mm
Printing Specifications
Explanation
The top area may become slightly uneven
depending on the image since the print
operation stops while cutting the top edge of
the roll paper.
The printed paper is approximately 2 mm
A
shorter than the specified size since the printer
cuts the paper inside the image to avoid
showing top and bottom margins.
After cutting the bottom edge of the previous
B
page, the printer feeds the paper, and then cuts
the top edge of the following page. Although
this produces 60 to 127 mm cut-off pieces, the
cut is more accurate.
Table 1-2. Continuous Stacker
Stackable Pages
Paper Type
SC-T3000 SC-T5000
Series Series
20 pages 20 pages
Plain paper
--- 20 pages
Table 1-3. Single Sheet Stacker
Maximum Length
SC-T5000 Series
Approx. 1,292 mm
Revision B
SC-T7000
Series
20 pages
20 pages
SC-T7000 Series
Approx. 1,575 mm
21
Confidential