Apg Unit - Epson SC-T7000 series Service Manual

SC-T7000 series/SC-T5000 series/SC-T3000 series

3.4.4.11 APG UNIT

When replacing/removing this part, refer to
A D J U S T M E N T
R E Q U I R E D
Items and the Order by Repaired Part" (p199)
perform the specified operations including required adjustment.
1. Remove the UPPER LEFT COVER.
2. Remove the UPPER SUPPORT R COVER.
3. Remove the PANEL BOARD. (p120)
4. Remove the TOP COVER. (p85)
5. Remove the RIGHT UPPER COVER & RIGHT ROLL COVER.
6. Remove the RIGHT LOWER COVER.
When removing the R Reinforce Plate in the next step, take care
C A U T I O N
not to remove the Upper Reinforce Plate together.
7. Remove the five screws, and remove the R Reinforce Plate.
A) Silver M3x6 S-tite screw with built-in washer: 3 pcs
B) Silver M3x8 S-tite screw with built-in washer: 2 pcs
Pay attention to the positioning point (See
DISASSEMBLY & ASSEMBLY
"4.1.2 Adjustment
and make sure to
(p100)
(p94)
(p95)
(p96)
Figure 3-90).
Disassembly and Assembly Procedure
Upper Reinforce Plate
B
Rear Tube Guide
Positioning point
A
Figure 3-90. Removing the R Reinforce Plate
Revision B
APG UNIT
B
R Reinforce Plate
A
A
144
Confidential