Pe Sensor (Roll Paper) - Epson SC-T7000 series Service Manual

SC-T7000 series/SC-T5000 series/SC-T3000 series

3.4.5.9 PE SENSOR (ROLL PAPER)

1. Remove the REAR ROLL COVER FRAME.
2. Remove the two screws, and remove the PE Sensor Assy.
A) Silver M3x8 S-tite screw with built-in washer: 2 pcs
Back side
Figure 3-136. Removing the PE Sensor Assy
DISASSEMBLY & ASSEMBLY
(p105)
PE Sensor Assy
A
A
Disassembly and Assembly Procedure
3. Disengage the hook, and remove the PE SENSOR.
4. Release the cable from the hook of the Holder.
5. Disconnect the cable from the PE SENSOR.
Connector
Cable
Figure 3-137. Removing the PE SENSOR (ROLL PAPER)
Revision B
Back side
Hook
PE SENSOR
Holder
Hook
177
Confidential