SC-T7000 series/SC-T5000 series/SC-T3000 series
15. Disconnect the cable of the CR MOTOR from the connector (CN19) of the MAIN
BOARD.
16. Release the cable from five clamps.
Clamp
MAIN BOARD
Figure 3-87. Releasing the Cable
DISASSEMBLY & ASSEMBLY
Clamps
Cable
CN19
Disassembly and Assembly Procedure
17. Cut the cable tie that secures the cable, and remove the CR MOTOR.
CR MOTOR
Figure 3-88. Removing the CR MOTOR
Revision B
Cable tie
142
Confidential