Ic Holder - Epson SC-T7000 series Service Manual

SC-T7000 series/SC-T5000 series/SC-T3000 series

3.4.4.14 IC HOLDER

When replacing/removing this part, refer to
A D J U S T M E N T
R E Q U I R E D
Items and the Order by Repaired Part" (p199)
perform the specified operations including required adjustment.
1. Perform the Ink eject. (p259)
2. Perform the Tube inner pressure reduction.
3. Remove the UPPER LEFT COVER.
4. Remove the UPPER SUPPORT R COVER.
5. Remove the PANEL BOARD. (p120)
6. Remove the TOP COVER. (p85)
7. Remove the RIGHT UPPER COVER & RIGHT ROLL COVER.
8. Remove the FRONT COVER. (p86)
9. Remove the RIGHT LOWER COVER.
10. Remove the IH COVER. (p89)
11. Disconnect the cable from the Relay Connector (No.2, No.8, No.10).
12. Remove the FFC from the back side of the IC HOLDER.
DISASSEMBLY & ASSEMBLY
"4.1.2 Adjustment
and make sure to
(p248)
(p100)
(p94)
(p95)
(p96)
Disassembly and Assembly Procedure
FFC
Figure 3-96. Disconnecting the Relay connectors and FFC
Revision B
IC HOLDER
Relay Connector
(No.2, No.8, No.10)
148
Confidential