SC-T7000 series/SC-T5000 series/SC-T3000 series
18. Remove the Motor Cover.
19. Disconnect the motor cable from the connector of the Cutter Motor.
Motor Cover
Motor cable
Figure 3-144. Releasing the Motor Cable
DISASSEMBLY & ASSEMBLY
Cutter Motor
Connector
Disassembly and Assembly Procedure
20. Remove the two screws, and remove the CUTTER UNIT.
A) Silver M3x6 screw: 2 pcs
Pay attention to the positioning points (See
Positioning point
Positioning point
A
Bottom Frame
Figure 3-145. Removing the CUTTER UNIT
Revision B
Figure
3-145).
CUTTER UNIT
Positioning point
A
Confidential
182