Head Slant Adjustment (Pf Direction); Head Slant Auto Adjustment (Pf Direction) - Epson SC-T7000 series Service Manual

SC-T7000 series/SC-T5000 series/SC-T3000 series

4.11.6 Head Slant Adjustment (PF direction)

The following two methods are provided.
Automatic adjustment: An adjustment pattern is printed and scanned by the IM
SENSOR, and required adjustment level is displayed.
Manual adjustment: Visually check the printed adjustment pattern, and determine
the required adjustment level.
The way to actually correct the head inclination according to the result obtained by any
of the above methods is the same.
PAPER USED
Type: Premium Glossy Photo Paper (250)
Size: The maximum paper width which can be set
EXECUTION MODE
Normal mode

4.11.6.1 Head Slant Auto Adjustment (PF direction)

1. Turn the printer ON.
2. Load the paper into the printer.
3. Start the Service Program and select
4. Click [Run].
The adjustment pattern will be printed.
5. The printed pattern is scanned by the IM SENSOR and the required adjustment
level (how much the adjustment knob should be moved) is displayed.
6. Make the adjustment referring to
(Page 258).
ADJUSTMENT
Head slant auto adjustment (PF
4.11.6.3Correcting Head Slant (PF direction)
Head Related Checks and Adjustments
Figure 4-48. [Head slant auto adjustment (PF direction)] Screen
direction).
Figure 4-49. Auto adjustment pattern
Revision B
256
Confidential