Epson SC-T7000 series Service Manual page 244

SC-T7000 series/SC-T5000 series/SC-T3000 series
6. Remove paper from the paper cassette, and carry out
rear by hand.
Within the standards: Go to
Out of the standards: Go to
7. Input the value which was measured in
8. Click [Write] and return to Step
9. Click [Finish].
10. Turn the printer OFF to finish the adjustment.
Bottom margin (14 ± 0.6 mm)
Paper feed
direction
Side margin Full
side (10 ± 0.4 mm)
Figure 4-30. Adjustment Pattern
ADJUSTMENT
Step 5 feeding paper from the
Step 9
Step 7
Step 5 and is out of the standards.
4.
Side margin Home
side (10 ± 0.4 mm)
Top margin (10 ± 0.4mm)
CR Related Adjustments
Revision B
244
Confidential