Main-C Board - Epson SC-T7000 series Service Manual

SC-T7000 series/SC-T5000 series/SC-T3000 series

3.4.3.3 MAIN-C BOARD

When replacing/removing this part, refer to
A D J U S T M E N T
R E Q U I R E D
Items and the Order by Repaired Part" (p199)
perform the specified operations including required adjustment.
1. Remove the UPPER LEFT COVER.
2. Remove the UPPER SUPPORT R COVER.
3. Remove the PANEL BOARD. (p120)
4. Remove the TOP COVER. (p85)
5. Remove the RIGHT UPPER COVER & RIGHT ROLL COVER.
6. Remove the REAR RIGHT LOWER COVER.
7. Remove the PSH BOARD. (p118)
8. Remove the MAIN-B BOARD.
9. Disconnect the cables from the connectors (CN1, CN2, CN4) of the MAIN-C
BOARD.
10. Remove the four screws, and remove the MAIN-C BOARD.
A) Silver M3x6 screw: 4 pcs
DISASSEMBLY & ASSEMBLY
"4.1.2 Adjustment
and make sure to
(p100)
(p94)
(p95)
(p99)
(p113)
Disassembly and Assembly Procedure
MAIN-C BOARD
A
A
Figure 3-43. Removing the MAIN-C BOARD
Revision B
A
CN1
CN2
A
CN4
114
Confidential