Fans; Board Box Fan - Epson SC-T7000 series Service Manual

SC-T7000 series/SC-T5000 series/SC-T3000 series

3.4.7 Fans

3.4.7.1 BOARD BOX FAN

1. Remove the UPPER LEFT COVER.
2. Remove the UPPER SUPPORT R COVER.
3. Remove the PANEL BOARD. (p120)
4. Remove the TOP COVER. (p85)
5. Remove the RIGHT UPPER COVER & RIGHT ROLL COVER.
6. Remove the REAR RIGHT LOWER COVER.
7. Remove the PSH BOARD. (p118)
8. Remove the MAIN-B BOARD.
9. Remove the MAIN BOARD. (p111)
10. Release the cable from the three clamps.
11. Remove the two screws, and remove the Board Box Fan.
A) Silver M3x20 screw: 2 pcs
DISASSEMBLY & ASSEMBLY
(p100)
(p94)
(p95)
(p99)
(p113)
Disassembly and Assembly Procedure
Bottom side
BOARD BOX FAN
A
A
Figure 3-146. Removing the BOARD BOX FAN
Revision B
Clamps
Cable
183
Confidential