SC-T7000 series/SC-T5000 series/SC-T3000 series
3.4.8.6 TAKE-UP REEL MOTOR
1.
Remove the Flange from the Auto Take-up Reel.
2.
Remove the TAKE-UP REEL COVER.
3.
Disconnect the connector (CN1) on the TAKE-UP REEL MAIN BOARD.
4.
Remove the four screws that secure the Power Supply Unit, and remove the Power
Supply Unit.
A) Black, Phillips, Bind S-tite M3x6:
DISASSEMBLY & ASSEMBLY
(p185)
4 pcs
Disassembly and Assembly Procedure
Flange
Figure 3-161. Removing the Flange
A
A
A
CN1
Figure 3-162. Removing the Power Supply Unit
Revision B
Auto Take-up Reel
TAKE-UP REEL MAIN BOARD
Power Supply Unit
A
192
Confidential