Pressure Roller - Epson SC-T7000 series Service Manual

SC-T7000 series/SC-T5000 series/SC-T3000 series

3.4.5.5 PRESSURE ROLLER

1. Remove the UPPER LEFT COVER.
2. Remove the UPPER SUPPORT R COVER.
3. Remove the PANEL BOARD. (p120)
4. Remove the TOP COVER. (p85)
5. Remove the FRONT COVER. (p86)
6. Rotate the Combination Gear 18.4, 37.6 counterclockwise to set the PRESSURE
ROLLER in the release position.
Combination Gear 18.4, 37.6
Figure 3-123. Rotate the Combination Gear 18.4, 37.6
DISASSEMBLY & ASSEMBLY
(p100)
(p94)
Disassembly and Assembly Procedure
7. Remove the Pressure Roller Shaft from the four grooves of the Release Roller
Assy.
Pressure Roller Shaft
Grooves
Figure 3-124. Removing the PRESSURE ROLLER (1)
8. Pull out the Pressure Roller Shaft from the three PRESSURE ROLLERs.
Figure 3-125. Removing the PRESSURE ROLLER (2)
Revision B
Release Roller Assy
Grooves
PRESSURE ROLLER
Pressure Roller Shaft
Confidential
170