SC-T7000 series/SC-T5000 series/SC-T3000 series
3.4.8.3 TAKE-UP REEL LED
1.
Remove the Flange from the Auto Take-up Reel.
2.
Remove the TAKE-UP REEL COVER.
3.
Disconnect the connector (CN1) on the TAKE-UP REEL MAIN BOARD.
4.
Remove the four screws that secure the Power Supply Unit, and remove the Power
Supply Unit.
A) Black, Phillips, Bind S-tite M3x6: four pieces:
5.
Disconnect the connector (CN23) on the TAKE-UP REEL MAIN BOARD.
6.
Release the harness from the cable guide, and remove the TAKE-UP REEL LED.
Flange
Figure 3-152. Removing the Flange
DISASSEMBLY & ASSEMBLY
(p185)
4 pcs
Auto Take-up Reel
Disassembly and Assembly Procedure
A
A
A
CN1
Figure 3-153. Removing the Power Supply Unit
TAKE-UP REEL LED
Cable guide
Figure 3-154. Removing the TAKE-UP REEL LED
Revision B
TAKE-UP REEL MAIN BOARD
Power Supply Unit
A
TAKE-UP REEL MAIN BOARD
CN23
187
Confidential