Im Sensor - Epson SC-T7000 series Service Manual

SC-T7000 series/SC-T5000 series/SC-T3000 series

3.4.4.17 IM SENSOR

When replacing/removing this part, refer to
A D J U S T M E N T
R E Q U I R E D
Items and the Order by Repaired Part" (p199)
perform the specified operations including required adjustment.
1. Perform the Tube inner pressure reduction.
2. Remove the UPPER LEFT COVER.
3. Remove the UPPER SUPPORT R COVER.
4. Remove the PANEL BOARD. (p120)
5. Remove the TOP COVER. (p85)
6. Remove the FRONT COVER. (p86)
7. Remove the LEFT UPPER COVER & LEFT ROLL COVER.
8. Remove the RIGHT UPPER COVER & RIGHT ROLL COVER.
9. Unlock the CR UNIT. (p83)
10. Remove the CR COVER. (p122)
11. Remove the DAMPER KIT. (p123)
12. Remove the PRINT HEAD. (p126)
13. Remove the RIGHT LOWER COVER.
14. Remove the APG UNIT. (p144)
15. Remove the CR MOTOR. (p141)
16. Remove the CR SCALE. (p135)
17. Remove the CR UNIT. (p156)
18. Remove the screw that secures the Sensor Cover.
A) Silver M3x8 P-tite screw with built-in washer: 1 pcs
19. Disengage the two hooks, and remove the Sensor Cover.
DISASSEMBLY & ASSEMBLY
"4.1.2 Adjustment
and make sure to
(p248)
(p100)
(p94)
(p101)
(p95)
(p96)
Disassembly and Assembly Procedure
A
Sensor Cover
Hooks
Sensor Cover
Figure 3-111. Removing the Sensor Cover
Revision B
CR UNIT
159
Confidential